...
When using an TruPulse 200 and recording tree heights, use height Height (HT) mode.
Start by pointing at the tree and holding the ‘Fire’ button until the distance is displayed. Release the button.
Next, aim for the base of the tree and hold the ‘Fire’ button until the angle is displayed and steady. Release the button.
Next, aim for the desired height (e.g., merch height or tip of tree) and hold the ‘Fire’ button until the angle is displayed and steady. Release the ‘Fire’ button. The TruPulse will display the height in the viewfinder and send the result to MobileMap. Verify the value is correct and in the correct row and cell.
If the distance to tree is also desired, use the down arrow on the TruPulse 200 to select
...
Horizontal Distance (
...
HD) mode. Once in HD mode, start by pointing at the tree and holding the ‘Fire’ button until the distance is displayed. When you release the ‘Fire’ button, the TruPulse will display the horizontal distance to the tree in the viewfinder and send the result to MobileMap. Verify the value is correct and in the correct row and cell.
LaserTech TruPulse 360R
When using the TruPulse 360R the height, distance and azimuth can all be captured in height (HT) mode.
Start by pointing at the tree and holding the ‘Fire’ button until the distance is displayed. When the
...
‘Fire’ button is released, it will be sent to MobileMap. An alert will sound and the distance and azimuth will be populated.
...
GPS offset coordinates will also be captured from the best available GPS location and displayed in the appropriate cells.
Next, then aim for the base of the tree and hold the ‘Fire’ button until the angle is displayed and steady. When the button is released, an alert will sound but no new data will be populated
...
.
Next, aim for the desired height (e.g., merch height or tip of tree) and hold the ‘Fire’ button until the angle is displayed and steady. When you release the ‘Fire’ button, the TruPulse will display the height in the viewfinder and send the result to MobileMap. Verify the value is correct and in the correct row and cell.
Haglof Vertex Laser Geo
When using the Haglof Vertex Laser Geo, collect data using 3-point height (HEIGHT 3P) mode. Use the DME and SEND buttons to cycle through the modes until HEIGHT 3P is displayed on the heads-up display.
...